USB 3.0 & SMB V2 2.0

[CopierNerd]

Konica Minolta 7 series & 8 series support SMB V2 alonh SMB V1. But my question is from where i can check or see this feature/option? I am looking for this protocol mentioned in any brochure or KM official document. OR i can check it from machine in network settings?

Also, Konica Minolta 7 & 8 series supports USB 3.0? or Not?

[tsbservice]

[Utility]
[Administrator Settings]
[Network Settings]
[SMB Settings]
[SMB Server Settings]
[SMB Server Common Settings]
[SMB Authentication Protocol]

As for USB 3.0 they will work but speed is limited to 2.0, atleast for FW update.

[CopierNerd]

[Utility]
[Administrator Settings]
[Network Settings]
[SMB Settings]
[SMB Server Settings]
[SMB Server Common Settings]
[SMB Authentication Protocol]


you mean NTLM V1 & NTLM V2?

[REGSIS]

Konica Minolta 7 series & 8 series support SMB V2 alonh SMB V1. But my question is from where i can check or see this feature/option? I am looking for this protocol mentioned in any brochure or KM official document. OR i can check it from machine in network settings?

Also, Konica Minolta 7 & 8 series supports USB 3.0? or Not?

SMB V1/V2 should be default setting.
Can be checked in service mode System 2 -> software switch settings switch 219 all bits are 0.

[Synthohol]

hopefully this will clear things up...

[tsbservice]

you mean NTLM V1 & NTLM V2?
Yeah.