View Full Version : USB 3.0 & SMB V2 2.0
CopierNerd
08-24-2019, 02:39 PM
Konica Minolta 7 series & 8 series support SMB V2 alonh SMB V1. But my question is from where i can check or see this feature/option? I am looking for this protocol mentioned in any brochure or KM official document. OR i can check it from machine in network settings?
Also, Konica Minolta 7 & 8 series supports USB 3.0? or Not?
tsbservice
08-24-2019, 03:08 PM
[Utility]
[Administrator Settings]
[Network Settings]
[SMB Settings]
[SMB Server Settings]
[SMB Server Common Settings]
[SMB Authentication Protocol]
As for USB 3.0 they will work but speed is limited to 2.0, atleast for FW update.
CopierNerd
08-24-2019, 03:16 PM
[Utility]
[Administrator Settings]
[Network Settings]
[SMB Settings]
[SMB Server Settings]
[SMB Server Common Settings]
[SMB Authentication Protocol]
you mean NTLM V1 & NTLM V2?
REGSIS
08-25-2019, 10:03 AM
Konica Minolta 7 series & 8 series support SMB V2 alonh SMB V1. But my question is from where i can check or see this feature/option? I am looking for this protocol mentioned in any brochure or KM official document. OR i can check it from machine in network settings?
Also, Konica Minolta 7 & 8 series supports USB 3.0? or Not?
SMB V1/V2 should be default setting.
Can be checked in service mode System 2 -> software switch settings switch 219 all bits are 0.
Synthohol
08-25-2019, 02:36 PM
hopefully this will clear things up...
tsbservice
08-25-2019, 02:48 PM
you mean NTLM V1 & NTLM V2?
Yeah.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.