View Full Version : Brother MFC 8910 Paper Jam when selecting multiple copies
Rich123
09-24-2019, 10:14 PM
Brother MFC 8910 jams when doing more than one copy. No jams on a single copy. Paper jams exiting fuser unit with another page following stopping under drum unit. There are no wrinkles or folding of paper. I repaired fuser about 6 months ago, and it seems to be fine. I did change pickup paper solenoid, but no luck. Could this be a sensor? Any ideas? Thanks.
Phil B.
09-25-2019, 01:19 AM
Brother MFC 8910 jams when doing more than one copy. No jams on a single copy. Paper jams exiting fuser unit with another page following stopping under drum unit. There are no wrinkles or folding of paper. I repaired fuser about 6 months ago, and it seems to be fine. I did change pickup paper solenoid, but no luck. Could this be a sensor? Any ideas? Thanks.
total page count?
when was the feed kit 1 & 2 changed out?
what is the jam code?
do you have a manual?
are you a tech?
how did you 'repair" the fuser unit? they don't sell fuser part.. just complete assemblies.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.