View Full Version : CQ Samsung CLX 6260
denden4h
09-26-2019, 02:51 PM
Customer brought this in after he worked on it. Unit is not printing Magenta. He installed a new Laser which didn't fix anything. I removed and checked the Transfer Belt and the High Voltage, but both look good. The cartridge is rotating so I believe it's a charge issue.
bsiap
11-30-2020, 08:11 PM
I had the same problem. Did you find a solution?
Phil B.
11-30-2020, 08:18 PM
I had the same problem. Did you find a solution?
been a year..doubtful if he is even on here anymore
looking at his profile.. not sure if he is even a tech.
copier tech
11-30-2020, 08:35 PM
I had the same problem. Did you find a solution?
I had this issue just last week, transfer roller holder was broken in the transfer belt unit, roller was not making contact with the belt/drum thus blank prints of the one colour.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.