PDA

View Full Version : PC-210 and PC-215


Custom Search


Bix
10-09-2019, 03:19 PM
Hi, I have a PC-210 that I would like to install in a bizhub 308e/458e


Are compatible? Because in the manual it says PC-215 that I think is the next model.


Thank you so much for those who know something
best regards

B0265
10-09-2019, 03:28 PM
I know one case where a PC-410 was installed on a C458 by misstake, and his resultet in paper jams every time.
I'm not familiar with the 308e, but since the PC-410 works with the C308 perhaps it might be possible.

Bix
10-09-2019, 03:42 PM
In the manual I read that PC-210 is compatible with C554e/C454e/C364e/C284e/C224e/C554/C454/C364/C284/C224/C368/C308/C258/558/458/368/308/554e/454e/364e/284e/224e


However, the 8e series is not mentioned. So I don't know, if anyone has experience, it's welcome!

Woxner
10-09-2019, 03:49 PM
according to the spec sheet it is not listed. havent tried to see if it works

emujo2
10-09-2019, 06:55 PM
C458 and 368e family take PC-X15..nothing else will work and you are lible to blow a board trying to make it work. E

Bix
10-10-2019, 11:22 AM
I just saw the connectors.
Both have 13 pins, both PC-210 and 308e.
But I haven't tried to connect them yet. You say there could even be board breakdowns?

occus
10-18-2019, 10:19 AM
It could blow the board.

In my case, it does not but i get jam on every print.
So forget it.

Synthohol
10-18-2019, 12:54 PM
yes it jams every page.
not compatible. sorry.

rrrohan
10-21-2019, 03:47 AM
i installed one on a 8 series by mistake. like everyone says, jam jam jam.

Custom Search