PDA

View Full Version : I need to NVRAM reset tool bizhub C280


Custom Search


mhmds102466
11-07-2019, 06:31 PM
I need to NVRAM reset tool bizhub C280
I have an engineer now and I want to calibrate the colors
We don't know a password
Service Mode

I previously got a tool
A145FW
For the machine bizhubC224_C284
Please help me to skip the password and try all the default words
"9272 9272"
And
"12345678"
And
"00000000"
No default word worked
43961

Emil : al_rasheed_mecca@hotmail.com
thank you:cool::confused:

darry1322
11-07-2019, 06:41 PM
Don't forget to run the setup procedure after you reset the NVRAM or you'll get the "lines of shame" again.

mhmds102466
11-07-2019, 07:03 PM
Don't forget to run the setup procedure after you reset the NVRAM or you'll get the "lines of shame" again.


Ok

mhmds102466
11-07-2019, 07:13 PM
Is there a way to skip the password
Like opening the door from the front
Because the method works with C284

mhmds102466
11-07-2019, 07:15 PM
If there is no way I want to get the file
A0ED0Y0-F000-GQ7-D1 (00)

copier tech
11-07-2019, 09:18 PM
I need to NVRAM reset tool bizhub C280
I have an engineer now and I want to calibrate the colors
We don't know a password
Service Mode

I previously got a tool
A145FW
For the machine bizhubC224_C284
Please help me to skip the password and try all the default words
"9272 9272"
And
"12345678"
And
"00000000"
No default word worked
43961

Emil : al_rasheed_mecca@hotmail.com
thank you:cool::confused:

Here you go.

https://mega.nz/#!gd8jCYwD!agQynNHkdV8iRKRK8HwNWKV1s5BX8n7cDkIl6Jh TFuY

43964

mhmds102466
11-08-2019, 03:58 PM
I've got "lines of shame" again.
:mad::mad::mad::mad::mad::mad::mad:

Help me Please....

I followed all the instructions

mhmds102466
11-09-2019, 03:18 PM
How are you doing
I want any engineer
To donate and I will contact him via imo program or Skype
Or Facebook Messenger
Solves me the problem
lines of shame


I would be very grateful to you and to the forum:)

mhmds102466
11-09-2019, 03:19 PM
I have no problem if I ask for money because I would be very grateful to him after fixing the problem

copier tech
11-09-2019, 06:06 PM
I've got "lines of shame" again.
:mad::mad::mad::mad::mad::mad::mad:

Help me Please....

I followed all the instructions

You must have missed a step.

Post a print sample.

mhmds102466
11-09-2019, 06:58 PM
You must have missed a step.

Post a print sample.
43973

mhmds102466
11-09-2019, 06:59 PM
When copying only

copier tech
11-09-2019, 07:06 PM
When copying only

Follow the set up procedure to the letter.

mhmds102466
11-09-2019, 07:11 PM
[QUOTE = copier tech؛ 958261] اتبع إجراء الإعداد للحرف. [/ QUOTE]
43974


I don't know what to do

copier tech
11-09-2019, 07:16 PM
[QUOTE = copier tech؛ 958261] اتبع إجراء الإعداد للحرف. [/ QUOTE]


43974


I don't know what to do
















Follow this guide.

43975

mhmds102466
11-09-2019, 07:31 PM
Follow this guide.

43975


where do I start

mhmds102466
11-09-2019, 07:32 PM
Follow this guide.

43975
Enter the service Manuel and never steps and do not show where

copier tech
11-09-2019, 07:42 PM
where do I start

I'd suggest page 1.....................

copier tech
11-09-2019, 07:43 PM
Enter the service Manuel and never steps and do not show where

Press counter, check details stop,0,0,stop,0,1

mhmds102466
11-09-2019, 08:10 PM
Press counter, check details stop,0,0,stop,0,1

43977
43978
43979
43980
43981

copier tech
11-09-2019, 08:22 PM
43977
43978
43979
43980
43981

This is not a C280.

mhmds102466
11-09-2019, 10:04 PM
This is not a C280.

I have 2 machines c280 c284e I'm having the same fonts problem

mhmds102466
11-09-2019, 10:23 PM
I'm so sorry for noise
Possible to send a video and I apply the steps so that I can solve the problem because the machine is worthless without copying
I am very thankful to you
Please help me
Please
Thank you and I appreciate your effort You are a hardworking and wonderful person:o

mhmds102466
11-09-2019, 10:47 PM
Please list all steps to resolve the problem
In the form of points in order
I will take steps to solve the problem
Thanks

copier tech
11-10-2019, 10:37 AM
Please list all steps to resolve the problem
In the form of points in order
I will take steps to solve the problem
Thanks

Follow the installation process for the C224e similar to the C280.

43984

mhmds102466
11-10-2019, 10:47 AM
Performed the steps of the attached book page number E-11
The problem is still there

mhmds102466
11-10-2019, 10:50 AM
There is only one step in the attached book last night, step number XIV
Non-image area erase check1. Select the Non-Image Area Erase Check functionas follows: Machine → → Non-Image Area Erase Check
The result appears
If “Result” is “NG1” or “NG2”,
Does the plan affect the process

mhmds102466
11-10-2019, 02:34 PM
Follow the installation process for the C224e similar to the C280.

43984

You skipped this step
Adjust the gradient adjustment
Because
Tray 1 with A3 has a problem skipping A3
And I went to tray 2 A4
The rest of the steps are completed
The problem remains

arahael
11-10-2019, 03:25 PM
remember
dont forget about
CALIBRATE TOUCHSCREEN
INPUT / CHECK TIME AND DATE
congratulations

mhmds102466
11-10-2019, 04:10 PM
remember
dont forget about
CALIBRATE TOUCHSCREEN
INPUT / CHECK TIME AND DATE
congratulations

I carried out the steps as you told me and the problem was not solved, sorry

When shooting from the scanner above the glass blue appears in the entire page
43986
When shooting from the federal apparatus over the glass appears red color in the entire page
43987
I do not know what is missing step to complete the process to solve the problem Is there any meter or reading I have no data in the machine I photograph you possible know the solution

Synthohol
11-10-2019, 09:48 PM
are you repeating the gradations three times EACH?
start from scratch and try again.

Phil B.
11-10-2019, 10:02 PM
are you repeating the gradations three times EACH?
start from scratch and try again.

this is the 2nd thread he has started... same shit over n over...

frankly I wish he'd hire A REAL TECH to do the job

this is getting really stupid.. he gets it right (after months) then goes in and fucks it all up so we have to start all over again! you would think the lamer would keep notes :mad::mad::mad:

Synthohol
11-10-2019, 11:26 PM
its to the point i just want to record the process so any future Lines o' shame can be solved once and for all.
but a C280 belongs in the scrapyard.

Phil B.
11-10-2019, 11:28 PM
its to the point i just want to record the process so any future Lines o' shame can be solved once and for all.
but a C280 belongs in the scrapyard.

agreed

Toxic
11-11-2019, 12:15 AM
He might be just trolling everybody here...

Phil B.
11-11-2019, 06:29 AM
He might be just trolling everybody here...

or maybe .. JUST maybe ..

the proverbial "box-o-rocks" has got 80+ IQ points on him?

hmmmmm? :confused::rolleyes:;):cool:

arahael
11-11-2019, 08:17 AM
Before you start , try clear all data. and follow step by step

Phil B.
11-11-2019, 08:28 AM
Before you start , try clear all data. and follow step by stepWe have had do this for the past few months..[emoji21][emoji29]

Sent from my SM-G960U using Tapatalk

mhmds102466
11-11-2019, 01:56 PM
Possible one of the forum donates a video file explaining the process of repair of the lines

Phil B.
11-11-2019, 05:39 PM
Possible one of the forum donates a video file explaining the process of repair of the lines

you have been given the install info time n time n time again.

IF you need a "video" to get you thru it .. you are not a tech.

why the hell can't you just follow the MANUAL like everyone else does?


:mad::mad::mad::mad:

mhmds102466
11-11-2019, 07:47 PM
you have been given the install info time n time n time again.

IF you need a "video" to get you thru it .. you are not a tech.

why the hell can't you just follow the MANUAL like everyone else does?


:mad::mad::mad::mad:


I followed the entire preparation steps and did not solve the problem I know that I am not technical
But the video file will help

mhmds102466
11-11-2019, 08:10 PM
I went to the bizhub machinery maintenance center
I explained to them the problem, and I had a technical office requesting $ 400
To solve the problem is it reasonable to solve the problem the cost of all these amounts and I have a machine number
And the amount is too exaggerated
I ask the artists of the forum to make a video to solve the problem and I apply the steps and thank you
I know I'm annoying to you, but I want to help because the machine doesn't work
Thanks:):)

Phil B.
11-11-2019, 08:19 PM
I went to the bizhub machinery maintenance center
I explained to them the problem, and I had a technical office requesting $ 400
To solve the problem is it reasonable to solve the problem the cost of all these amounts and I have a machine number
And the amount is too exaggerated
I ask the artists of the forum to make a video to solve the problem and I apply the steps and thank you
I know I'm annoying to you, but I want to help because the machine doesn't work
Thanks:):)

OH another brokedick end user determining HOW MUCH technical help is worth...

lemme pose this question...

with all the PROPER instruction you have received here FOR FREE, how much value ($$) do you place on help? Plenty as long as it's FREE!

you were told from the gitgo how to fix it but you SHOULD hire a qualified tech. We have dicked with you for 3 months... you get it right.. then change something and we're back to square one over n over..

I'm done and I think we should STOP trying to help someone that CLEARLY isn't capable of following WRITTEN STEP BY STEP instructions...:mad::mad::mad: (I wish we had a middle finger emoji ... so I could tell you to FUCK OFF!)

mhmds102466
11-12-2019, 02:08 PM
Thank you for your attention
thank you all
I solved the problem of the c284e machine
And the rest I have c280
Because I cleared all the evidence and started the numbers from scratch
The result is positive and the lines have gone forever
Thanks a lot
Thank you words are not enough thank you all
:o:o:o:o:o:o:o:o:o

Custom Search