PDA

View Full Version : Bizhub 4700 Display flickering !


Custom Search


GeorgeBest
11-08-2019, 09:46 AM
HI,

Got some bizhubs 4700, error with the display, turning on te printer, the display starts flickering on/of, blinking white screen/logo
is warming up but no ready state.

What causes this? Is it the operation panel? or something with the controll board . . .

Not much experience with this model

Thanks in advance
gr George

Bix
11-08-2019, 10:06 AM
Hi, it's likely a fake contact or pinched display cable.


If you try to push, you will see that something will happen. I advise you to try to take it apart and see if there is any problem with the cable. If the cable looks ok, replace the display.

Custom Search