PDA

View Full Version : C4050i magenta toner goes to PH


Custom Search


Bix
11-11-2019, 04:00 PM
Hi, I did a couple of visits on a C4050i.


On installation I found some toner in the PH glass. After cleaning with the cleaning stick, everything is ok. Initially I thought of a possible moviementato transport.


After about a month, I came back to set up customer settings. The customer did not report any problems to me but I noticed an imprecise color again by printing the demo page. I found the magenta toner in the PH glass again. Currently TC has just over 1k


Now I have also updated the firmware from G00-23 to G00-73.Has something similar happened to someone?

tsbservice
11-11-2019, 04:55 PM
Bix, Good job by spoting the problems before client complains about.

Not seen this so far but a couple of things:
1. Only magenta PH window is affected first and second time?
2. There were some threads here about IUs dumping developer and failed prematurely.

I will do 30% solid coverage test on all 4 colors to inspect them for diminish developer and will check TCR ratios in SM.
Next will do stabilize and gradations again if everything looks normal.

Bix
11-12-2019, 07:52 AM
Exactly, only in magenta ph window. I noticed the problem by printing the univocal ones, I will keep an eye on it

Custom Search