PDA

View Full Version : Dead Machine kyocera taskalfa 300ci WELCOME message.... help


Custom Search


wcanonw
11-18-2019, 03:56 PM
hello a favor do you have the firmware?
I need the firmware to see if the fault is due to the firmware:(:(:(:(

Phil B.
11-18-2019, 04:43 PM
hello a favor do you have the firmware?
I need the firmware to see if the fault is due to the firmware:(:(:(:(

why the fuck did you start another thread on this?

wcanonw
11-18-2019, 04:51 PM
why the fuck did you start another thread on this?


because nobody contributes with the firmware :confused:

Phil B.
11-18-2019, 05:15 PM
because nobody contributes with the firmware :confused:

1) you have an open thread on this

2) you are NOT a contributor

3) most "suggestions" you have made in other threads were USELESS

4) Firmware and Manuals are COPYRIGHTED materials

5) if you are a tech (highly doubtful) you're not much of one.

6) all those comments/posts you have red flags and no rep power.. = LOSER

Tom
11-20-2019, 03:06 PM
1) you have an open thread on this

2) you are NOT a contributor

3) most "suggestions" you have made in other threads were USELESS

4) Firmware and Manuals are COPYRIGHTED materials

5) if you are a tech (highly doubtful) you're not much of one.

6) all those comments/posts you have red flags and no rep power.. = LOSER
Lol, Phil don't hold his punches.

Scott
11-20-2019, 04:49 PM
Dang Phil lighten up!

Custom Search