View Full Version : bizhub 4020 where is autoswitch tray?
Hi, does anyone remember where I can find the setting to disable the tray autoswitch setting when the paper ends on bizhub 4020?
thank you
tsbservice
11-29-2019, 05:13 PM
Try this:
Configure MP menu - set to Manual instead of default Cassette. That shouldl set MP feeder only for manual print jobs.
Try this:
Configure MP menu - set to Manual instead of default Cassette. That shouldl set MP feeder only for manual print jobs.
Hi, thanks for the suggestion but in the normal settings I could not find this setting.
Not even by pressing 2, 6. The only setting I could find is the feed source. I can set manual but if they make a copy, it requires printing from the bypass.
Let me know if you have any other advice.
Thanks
Bix
Perhaps I have identified. It's called MU configuration
tsbservice
12-02-2019, 08:40 AM
Tray Linking
This feature links all trays with the same paper size and type. When a tray becomes empty, the printer
will feed paper from the linked tray.
Available options:
On
Off
Thanks a lot tsbservice, it's the exact option!
Unfortunately, the German translation of the manual is not very intuitive. I was convinced that that option would disable the visibility of those trayers.
Thanks again!
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.