PDA

View Full Version : Error Code c4641


Custom Search


E-ring
12-02-2019, 10:38 AM
hi
We have a Develop Ineo+ 2060L here that gives us some trouble:
C4641, C4642, C4643 (and a few 4631, 4632, 4633)

It appears only after printing, when the printer does the self adjustment, or when color registration auto adj. is made manually (after printing)
After a restart, color registration auto adj. finishs normally, several times.

We tried solenoid, Transferbelt and returning to install data.



Thanks for suggestions...

tsbservice
12-02-2019, 11:46 AM
If color registration shutter solenoid is not failing it may be PRCB...is my guess.
Btw, nice user name and picture :)

E-ring
12-02-2019, 06:44 PM
If color registration shutter solenoid is not failing it may be PRCB...is my guess.
Btw, nice user name and picture :)

Thanks!

One of my colleagues remembered a similar case... FW had a bug, so I will try that next.

tsbservice
12-02-2019, 07:46 PM
Doing FW won't hurt. Good luck.

E-ring
12-03-2019, 03:44 PM
It is a FW bug!
Everything newer than the G00 that was installed will solve it.

E-ring
12-06-2019, 07:33 AM
It is a FW bug!
Everything newer than the G00 that was installed will solve it.


So, in the end it was not the mass production FW that solved it, its a bug fixing one gmf21. You have to search for C4661, all the other errors I had are not mentioned.

Whole trouble was caused by customer choosing Toner save in each tray setup (cheap f...).
I guess, printer uses low density only in adjustments outside of tech mode.

Amine
01-23-2024, 12:50 PM
So, in the end it was not the mass production FW that solved it, its a bug fixing one gmf21. You have to search for C4661, all the other errors I had are not mentioned.

Whole trouble was caused by customer choosing Toner save in each tray setup (cheap f...).
I guess, printer uses low density only in adjustments outside of tech mode.


i dont understand the solution i have the same problem
please you can explain

Custom Search