PDA

View Full Version : Dead Machine C6000 DCPS 1~ fail to power up !!!!


Custom Search


selmila
12-06-2019, 08:32 AM
C6000 DCPS 1 fail to start up the machine!!

after the main power is switched ON, the machine just shows the power indicator LED in green and display stay blanck!
I have cross checked the DCPS in the other machine and confirm it is DCPS failure!!

IF ANY ONE CAN SUPPORT ME IN FIXING THE DCPS IS APPRECIATED.

tulintron
12-06-2019, 07:03 PM
[CITAÇÃO = selmila; 1062876] Inside the Wiring diagram find the DCPS / 1 and find the input and output connectors. Check the board for the voltages specified in the diagram.

make necessary measurements.


outputs at 5V, 12V and 24V.


saídas em 5V, 12V e 24V.

Custom Search