PDA

View Full Version : bizhub PRO 951, J17-01


Custom Search


blackcat4866
12-15-2019, 01:46 AM
This might be the smallest paper jam I've ever located.

I removed PS40, looked, and started to re-install the registration sensor when I thought: "Hey, wait a minute! Did I see something?"

The scrap 2mm x 5mm was statically clinging to the upper registration guide.

44392

=^..^=

methogod
12-15-2019, 04:22 AM
had a jam like that, but was a tiny piece on the red registation cleaning brush.

those alignment rollers look pretty worn...

allan
12-15-2019, 06:46 AM
Worn? Thats how they look before they are run in...

At about 20 million they are only half baked.

blackcat4866
12-15-2019, 03:09 PM
This machine has less than 2M. =^..^=

tsbservice
12-15-2019, 03:23 PM
I guess it doesn't matter how small it is as long as it sticks to the right(wrong) place :D

Custom Search