View Full Version : IC 409
big jase
10-24-2008, 04:25 PM
i have installed a c451 with an ic409 ,printing and scaning are working fine, but when i try to look at setting of fiery on copier i am just getting a please wait msg. the customer has 5 pc's and 2 apples mac connected..i need to get of test prints and pantone charts...please help:confused::confused::confused:
Specilist KVN
10-24-2008, 06:26 PM
i have installed a c451 with an ic409 ,printing and scaning are working fine, but when i try to look at setting of fiery on copier i am just getting a please wait msg. the customer has 5 pc's and 2 apples mac connected..i need to get of test prints and pantone charts...please help:confused::confused::confused:
Have you tried to log into the Fiery via your web browser?
Type in the IP address of the Fiery, and click on the webtoolslogog ofr a hidden popup.
You can also access what you need via Command Workstation.
big jase
11-04-2008, 08:02 PM
thanks got chart via cmd workstation, gateway was set incorrectly was able to reset when i used web browzer:):)
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.