PDA

View Full Version : 658e prints completely black


Custom Search


Bix
01-13-2020, 06:42 PM
Hi, I have a bizhub 658e with 280k and it has started printing with white lines and a little dark. I use only OEM.
As foreseen in the manual (300k) I have replaced: transfer belt, 2nd transfer roller, toner filter and drum.

But something went wrong. The drum has some problem why because the printer prints the whole sheet completely black! By putting the old drum back, this does not happen. Maybe a new defective drum? As soon as I removed the drum, near the charge roller I saw it has a piece of broken plastic. I honestly don't know how to take these drums apart, so I think I'll try another new drum. Has this ever happened to you?​

tsbservice
01-13-2020, 07:20 PM
Bix, don't have such machine but if I were at your place will put another new drum into machine.
Next at the shop when you have time rebuild drum unit with broken part with this part from original one drum.

blackcat4866
01-13-2020, 07:22 PM
Not me but certainly plausable. =^..^=

mo0651
01-14-2020, 10:56 PM
Are you positive you have correct Drum??:cool:

AL parts
01-15-2020, 09:01 AM
Try to install the old drum's PCR to the new drum

Bix
01-15-2020, 02:28 PM
Are you positive you have correct Drum??:cool:

yeah, if I remember, it is DR314

srvctec
01-17-2020, 08:19 PM
I had this happen on a C558. Broken holder for the charge roller, from the factory. Had to RMA it and get a new drum.

Bix
01-20-2020, 10:11 AM
Hi, yes I confirm.
A piece of white plastic from the charge roller was swept. I took a used drum and I replaced the piece. The only problem is the chip which does not reset but is not essential

Custom Search