PDA

View Full Version : Bizhub c3350 switch 5 setting for toner issue?


Custom Search


mrfuser
02-05-2020, 10:57 PM
Anyone know what the setting should be for software switch 5 to alleviate cartridge problem?

Synthohol
02-05-2020, 11:40 PM
wasnt it engine dip sw 34?
yes engine sw 5

4.25.5 DetailsofEachFunction-Choiceoftoneremptyrecoverymode
(1) Use
4 To perform the auxiliary toner replenishing sequence when the old toner cartridge is replaced after a toner-empty condition.
4 OFF: Not performed (default)
4 ON: Performed
(2) Procedure
1 Touch Service mode, -> Engine FW DipSW.
2 Touch 5, select ON, and touch OK.
3 Touch Close and exit from the Service Mode.
4 Be sure to exit service mode BEFORE powering off the machine

mrfuser
10-05-2021, 07:24 PM
Below fix doesn’t exist on c3350 that we could ever find.




wasnt it engine dip sw 34?
yes engine sw 5

4.25.5 DetailsofEachFunction-Choiceoftoneremptyrecoverymode
(1) Use
4 To perform the auxiliary toner replenishing sequence when the old toner cartridge is replaced after a toner-empty condition.
4 OFF: Not performed (default)
4 ON: Performed
(2) Procedure
1 Touch Service mode, -> Engine FW DipSW.
2 Touch 5, select ON, and touch OK.
3 Touch Close and exit from the Service Mode.
4 Be sure to exit service mode BEFORE powering off the machine

Custom Search