PDA

View Full Version : BizHub Pro 1100 B/W Intermediately doesn't fold 11x17 properly 100% of the time


Custom Search


Tonersniffer
02-27-2020, 03:51 PM
Issue from day 1 of use. see attachment. Before I blame paper, has any seen this? Any suggestions?
45082
Also any one know where this goes?
45083
Thanks for your help!

tech51
02-27-2020, 06:48 PM
The paper is not being pulled down to the fold position. If it’s intermittent then it could be static build up in the folding unit.

I use furniture polish on all the guides and places where the paper moves, this usually helps.

However these units are notorious for folding problems caused by many other things.

Try the polish and see how you get on.

emujo2
02-27-2020, 07:25 PM
Issue from day 1 of use. see attachment. Before I blame paper, has any seen this? Any suggestions?
45082
Also any one know where this goes?
45083
Thanks for your help!



Also any one know where this goes?
45083 Bush part...E

sadanand
03-02-2020, 04:14 AM
Also any one know where this goes?

45083 Bush part...E


This is in heater exit section ,your problem seems in exit section of heater check front side small rollers ,also check movement of black strip in exit section before copy reversal we are using paper upto 45 gsm

blackcat4866
03-03-2020, 01:30 AM
Were the calibrations done on the finisher and booklet maker? I suspect not. Look at the setup instructions. =^..^=

Tonersniffer
03-17-2020, 05:38 PM
Thanks Furniture polish resolved it.

Custom Search