PDA

View Full Version : Error Code Konicaminolta Biz c754e - error code - CD3AO


Custom Search


herath176
03-01-2020, 05:09 AM
Sir,

One of my konicaminolta Biz c754e machine indicate Boot - up signal only . after that I replace use ssd- board that removed from another good working Biz c754e machine . now machine start up and indicate error code CD3AO ( means - counter error ) Any one can help me to solve this error code .

Breg
Hemantha Herath

Synthohol
03-01-2020, 12:44 PM
You can try in service mode, stop 0 clear and see if engine data restore is listed and run it.

tsbservice
03-01-2020, 01:39 PM
When the SSD Board is removed from an “e”-series machine, no firmware is installed in the machine. You must load firmware when the SSD board is installed.

Custom Search