PDA

View Full Version : taskalfa 9003ci brand new out of box CQ issue


Custom Search


dpoutz
03-10-2020, 06:51 PM
we have a brand new 9003 with op to non op lines and voids from op to non op its a series of lines then ok for about 7 inches then more lines but not the same pattern. its not the drum unit .it almost looks digital so we are going to look at the laser next any ideas would be great thx

jmaister
03-11-2020, 02:11 AM
we have a brand new 9003 with op to non op lines and voids from op to non op its a series of lines then ok for about 7 inches then more lines but not the same pattern. its not the drum unit .it almost looks digital so we are going to look at the laser next any ideas would be great thx

Sample? Guy?

JR2ALTA
03-11-2020, 02:57 AM
wtf is op to non op?

dpoutz
03-11-2020, 12:54 PM
wtf is op to non op? front to back of machine duh

bsm2
03-11-2020, 01:00 PM
Reseat connectors on main board

dpoutz
03-12-2020, 01:36 PM
wtf is op to non op? Turned out to be Ran Maintenance mode 140 took care of Im told

Custom Search