View Full Version : Electrical Konica minolta C8000
sisirakj
03-13-2020, 05:49 AM
Hi dear all
I replace my Konica minolta c8000 PRCB
Unfortunately , It ask for firmware for PRCB
any can send PRCB firmware
my email sisirakj@gmail.com
Takhnamishvili
03-13-2020, 07:44 AM
Hi dear all
I replace my Konica minolta c8000 PRCB
Unfortunately , It ask for firmware for PRCB
any can send PRCB firmware
my email sisirakj@gmail.com
As I know, there are no firmware for only PRCB, you have to update engine firmware, finishing options firmware and controller firmware to the latest ones.
sisirakj
03-13-2020, 10:17 AM
Dear
firmware can be updated separately
there is OACB board assembly,
PRCB board
and finishing unit
each board firmware can be separately updated
my printer has version 60
if anyone can provide file for USB pen drive update it is better
Thanks45249
Synthohol
03-13-2020, 12:56 PM
PM sent.
thanks for contributing!!
Takhnamishvili
03-16-2020, 07:29 AM
Dear
firmware can be updated separately
there is OACB board assembly,
PRCB board
and finishing unit
each board firmware can be separately updated
my printer has version 60
if anyone can provide file for USB pen drive update it is better
Thanks45249
I know that they are separately, but it is not recommended to update only one of them, stable working of printer is not guaranteed in that case. If you update firmware of one of them to the latest one, you must update firmware of others to the same version too.
sisirakj
03-16-2020, 02:47 PM
Ok Takhnamishvili (https://www.copytechnet.com/forums/members/takhnamishvili.html)
actually thanks for advise
and i have not done this before
do you have this firmware file
or where can i get it
if you have please inform me to sisirakj@gmail.com
thanks
Synthohol
03-16-2020, 03:02 PM
sisirakj (https://www.copytechnet.com/forums/members/sisirakj.html)
check your PMs.
thanks for contributing :)
Takhnamishvili
03-17-2020, 07:47 AM
Ok Takhnamishvili (https://www.copytechnet.com/forums/members/takhnamishvili.html)
actually thanks for advise
and i have not done this before
do you have this firmware file
or where can i get it
if you have please inform me to sisirakj@gmail.com
thanks
You're welcome. You can call KM service engineer for updating firmware, or maybe someone on this forum can send it to you.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.