View Full Version : Brother l5850 jamming in doc feeder
Have a brother 5850 that paper goes about 1/2 inch into doc feeder then jams. Getting jammed by plastic piece connected to bottom roller(double feed prevention) as it sticks up to far. I have never worked on brothers so wanted any advise I can get before tearing apart. Thanks
tsbservice
03-30-2020, 06:01 PM
Generally speaking most if not all Brother DFs are not supposed to be disassembly. There aren't spare parts, just whole DF. I don't know this particular model but start with visual inspection if any parts are out of place, missing or broken. Next I would clean rollers etc. If it's jamming all the time same place, there's something physical obstruction of the paper path. If enduser removed jams whilst cover is closed they may flip back something.
Phil B.
03-30-2020, 06:23 PM
Generally speaking most if not all Brother DFs are not supposed to be disassembly. There aren't spare parts, just whole DF. I don't know this particular model but start with visual inspection if any parts are out of place, missing or broken. Next I would clean rollers etc. If it's jamming all the time same place, there's something physical obstruction of the paper path. If enduser removed jams whilst cover is closed they may flip back something.
+1
there are feed rollers for most Bro ADF's not sure about this one. replacing an adf assm can be a PIA.
monitech545
04-19-2020, 10:52 PM
Replace the fedar
Best printer repair in dubai uae,uaetech,copier machine repair in dubai , website development in dubai (https://printerrepairdubai.ae/service.php?catid=24&subname=%20Brother%20printer%20repair)
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.