Magicolor 5670 Imaging Unit Reset

[mkonkelz]

Hello,

i still have an old KM Magicolor 5670 Printer (which is soon going to be replaced) that stopped working because the black drum / imaging unit needs to be replaced.
It prints just fine and just stopped because the counter reached it`s end.

Because the toner cartridge is still at 60% and the printer is soon to be replaced i`d like to keep the current imaging unit until the toner cartridge is empty.

Do i now have to buy one of those reset-chips from the internet?
Or is there an other way to reset the imaging unit or tell the printer to print anyway?

Thank you :)

[Synthohol]

if you just chip it, the bias voltage may go back to default and cause crappy quality on that IU.
best just to replace with new.

[mkonkelz]

Thank you for your advice, but i don`t want to put new (190 Bucks a piece) Units in this Machine, because it`s going to be replaced soon anyway.

Also the other Imaging Units are very low, but there is plenty life left in the toner cartridges.

I`d just like to empty the current toner cartridges and then sort the whole thing out.

Image quality is not the No 1 priority here, cause it`s an old machine and i have others to print the important stuff.

[Toxic]

I think you should try just new chips, nothing much to lose,if something go wrong just trash that.
Once I replace IU chips on Bizhub C25 2 times with same IU and it working pretty much ok and still working.
That IU are made good and easy can do 50k without problems from my experience.

[tsbservice]

Some instructions can be found here:
How to replace the imaging unit ,drum chips for Konica Minolta magicolor 4650en,4650dn,4690mf,4695mf,5550 5570 5650,bizhub C20, C20P, C20PX, C20Xen,C30 | Simplyitem.com support center (https://simplyitem.com/esupport/index.php?/article/AA-00267/0/How-to-replace-the-imaging-unit-drum-chips-for-Konica-Minolta-magicolor-4650en4650dn4690mf4695mf5550-5570-5650bizhub-C20-C20P-C20PX-C20XenC30.html)

[Toxic]

Nice instructions :)
Hey Tsb,you got PM from me 10 days ago?