Bizhub c360

[hory_143]

Hi,
i have a mashine i dont know how to get in the System, anyone changed the password,
have i any other way to get in the system settings?
I think i need a nvram reset, but i dont have this jig firmware..

Thanks in advance, for helping..

[Phil B.]

Hi,
i have a mashine i dont know how to get in the System, anyone changed the password,
have i any other way to get in the system settings?
I think i need a nvram reset, but i dont have this jig firmware..

Thanks in advance, for helping..

what problems are you having?

do you have a manual?

[tsbservice]

If you mean CE mode password is changed from default, yes you will need this FW to change it back to default.

[hory_143]

what problems are you having?

do you have a manual?

Yes i have the manual but the default pw is changed from the default.
I have some of firmwares but theese dont change this only the nvram reset and i dont have it..

[Nexus]

If changed from another customer then need Special JIG file.When update this jig file then need setup machine for first time used check user manual for first time setup procedure.

[hory_143]

If changed from another customer then need Special JIG file.When update this jig file then need setup machine for first time used check user manual for first time setup procedure.

Can anyone send me then firmware?

[copyman]

have you tried all the obvious passwords?

9272927292729272

92729272

12345678

00000000

[hory_143]

have you tried all the obvious passwords?

9272927292729272

92729272

12345678

00000000

Yes that was first was i made

[truongxuananh]

Yes i have the manual but the default pw is changed from the default.
I have some of firmwares but theese dont change this only the nvram reset and i dont have it..

i need firware bizhub c280/360 to update please help me my email : truongxuananh1975@gmail.com thanks you

[truongxuananh]

Yes i have the manual but the default pw is changed from the default.
I have some of firmwares but theese dont change this only the nvram reset and i dont have it..

i need firware bizhub c280/360 to update please help me my email : truongxuananh1975@gmail.com thanks you

your prolem i think you should change nv ram pw service on it

[truongxuananh]

Yes i have the manual but the default pw is changed from the default.
I have some of firmwares but theese dont change this only the nvram reset and i dont have it..

i need firware bizhub c280/360 to update please help me ,my email :truongxuananh1975@gmail.com thanks you