C360 - LICENSE ERROR

[lordamet]

Good evening, recently removed the nvram from my bizhub c360 mfp and now I have an error on the screen that says: an error occurred with the license.

can you help me please. I do not have an MK account so I cannot enter the CE portal to obtain a new license I appreciate any help

[femaster]

Good evening, recently removed the nvram from my bizhub c360 mfp and now I have an error on the screen that says: an error occurred with the license.

can you help me please. I do not have an MK account so I cannot enter the CE portal to obtain a new license I appreciate any help


See this post, works for any of the older models, like your C360:
Solving "License Error" messages without access to LMS (https://www.copytechnet.com/forums/konica-minolta/96485-solving-licence-error-messages-without-access-lms-post457639.html#post457639)

[lordamet]

see this post, works for any of the older models, like your c360:
solving "license error" messages without access to lms (https://www.copytechnet.com/forums/konica-minolta/96485-solving-licence-error-messages-without-access-lms-post457639.html#post457639)


are you use this one before??

[femaster]

are you use this one before??

Not this specific serial/code combination, but I have used another combination I found somewhere else on a few machines in the past and it worked fine.

Just to clarify, you are talking about a "License Management Error" on a C360 (not a C360i), correct? If so, the previous link should work for you.

Here is another link with a better description. The serial/code combination is the same, but this one might be easier to follow:
Bizhub C353 "License Management Error" (https://www.copytechnet.com/forums/konica-minolta/55301-bizhub-c353-license-management-error-post477296.html#post477296)