PDA

View Full Version : Konica Minolta C450


Custom Search


Vesigoth
11-03-2008, 05:20 PM
I'm getting a C1183 code on this machine. Any ideas on what this means and how to clear it will be appreciated.

ni311
11-03-2008, 05:40 PM
C1183
Finishing option Elevator drive malfunction

Vesigoth
11-03-2008, 10:18 PM
Thanks ni311. I just opened the front door powered down and it reset the code and now working again. Thanks again.

fixthecopier
11-04-2008, 12:10 AM
Check the top tray on the finisher. If it is not screwed in properly someone could bump into it, knocking it slightly out of place. This would cause the elevator to over travel, because there is a switch on the side of the elevator, that the tray actuates to make it stop moving.

Vesigoth
11-04-2008, 08:49 PM
Thanks for the headsup fixthecopier. Good charicature of Nixon.

Custom Search