PDA

View Full Version : Miscellaneous C250i Self Diagnostic on start up

Custom Search


byronf
06-24-2020, 08:16 PM
Hi Guys,

I have a C250i that boots up straight into service mode self diagnostics. There are no errors all check results "OK". I have updated fw to G00-79 with no luck and I have redone the entire set up again, the machine is functional however the client is not happy to keep exiting the service mode screen whenever yhe machine is powered up.
tsbservice
06-24-2020, 08:36 PM
Do G00-7B FW.
Synthohol
06-24-2020, 09:52 PM
Unless the button is stuck in behind the panel?
Don't forget to change sw switch 25 to the newest function level.
I forget the hex, maybe someone can fill in that blank faster than me.
tsbservice
06-24-2020, 09:55 PM
Hex 10.
Bix
06-24-2020, 10:19 PM
Do G00-7B FW.
I didn't like this firmware, it did strange things for me. Now I prefer to experiment with GC1-7B
blackcat4866
06-24-2020, 11:33 PM
Unless the button is stuck in behind the panel?
Don't forget to change sw switch 25 to the newest function level.
I forget the hex, maybe someone can fill in that blank faster than me.

If the hex switch isn't changed, this is exactly what you'll get. It drove our in shop techs crazy for a few days.
ivovb
06-25-2020, 08:45 PM
Starting machine with Power key pressed will cause Self diagnostic. So check if Power key is somehow constantly blocked.

BR
tsbservice
06-25-2020, 09:02 PM
No stuck buttons involved just do FW and correct function version.
byronf
06-26-2020, 03:24 AM
No stuck buttons involved just do FW and correct function version.

Hi All,
Updated GC1-7B and correct the version and all is working normal.

Thank you all for your assistance.
Synthohol
06-26-2020, 03:52 AM
and thank you for the update :)
b.amur360
06-29-2020, 12:33 PM
You can stop the MFP to automaticly perform self diagnostics by adjusting dip sw 163 to hex 00

the default is to run auto diagnostics when it thinks it has a problem, but this can confuse customers who see the self diagnostics screen!

I prefer to turn this off.

BR
Albonline
06-30-2020, 04:03 PM
I didn't like this firmware, it did strange things for me. Now I prefer to experiment with GC1-7B


im running gc1-7b seems to be as stable as 45 but without the issues. just remember to disable marketplace before flashing.
Bix
07-07-2020, 04:03 PM
im running gc1-7b seems to be as stable as 45 but without the issues. just remember to disable marketplace before flashing.

Hi, I'm only reading now.
What will happen if this is not done?
Albonline
07-08-2020, 12:48 PM
Hi, I'm only reading now.
What will happen if this is not done?


The flash has sometimes been corrupted.

Custom Search