C454e air print function

[ck1]

May i know how to enable air print function , i upgrade firmware to A5C10Y0-F000-G20-M1 still can't found ( missing ) to on it .

[copyman]

These older models were not the best for mobile printing. See attached. Hopefully there is something in there that may help you.

[ck1]

These older models were not the best for mobile printing. See attached. Hopefully there is something in there that may help you.

thanks for sharing . But my issue is no button to on this function at adminstrator- network setting - air print

[copier tech]

thanks for sharing . But my issue is no button to on this function at adminstrator- network setting - air print

After you have updated the firmware you need to enable function version 7.

In CE mode System 2 > Software Switch Setting>Switch 25 set to HEX 60.

Reboot then you will have the AirPrint option in admin mode. (its off by default)

46029

[ck1]

After you have updated the firmware you need to enable function version 7.

In CE mode System 2 > Software Switch Setting>Switch 25 set to HEX 60.

Reboot then you will have the AirPrint option in admin mode. (its off by default)

46029
yes i follow the step ,but still no air print function at page two . now i blur.....

[copier tech]

yes i follow the step ,but still no air print function at page two . now i blur.....

There are two other SW that may need to be changed.

I would also update to the latest firmware version GDN-M1

46039

[ck1]

There are two other SW that may need to be changed.

I would also update to the latest firmware version GDN-M1

46039
thanks for sharing , i will try and update soon ...

[ck1]

thanks for sharing , i will try and update soon ...
Yes is work .Thanks so much ;)

[copier tech]

Yes is work .Thanks so much ;)


Great! thanks for the feedback!