PDA

View Full Version : Flashing Op panel on Bizhub 3320


Custom Search


SAR
07-16-2020, 09:11 PM
The entire Op panel assembly has been replaced so far and all board connectors reseated. The machine is functional, but the op panel is un usable, it just flashes.

Synthohol
07-17-2020, 03:51 AM
if it did it before the panel replacement i would think cable or the board its connected to. even its ssd maybe.
does it also flash if booted in some service mode?
ck power supply for 24 and 3.3/5v

rrrohan
07-17-2020, 04:18 AM
if it did it before the panel replacement i would think cable or the board its connected to. even its ssd maybe.
does it also flash if booted in some service mode?
ck power supply for 24 and 3.3/5v

flashes alive then blank?

ive had a 4 series with flashing main menu after a dodgy firmware update

SAR
07-27-2020, 09:42 PM
Thank you for the replies! Sorry to say I don't have an answer for this one.
The customer decided to just upgrade the machine, which worked out best for everyone.

tsbservice
07-27-2020, 09:46 PM
Thank you for the replies! Sorry to say I don't have an answer for this one.
The customer decided to just upgrade the machine, which worked out best for everyone.

Little POS, good decision.

Custom Search