PDA

View Full Version : CQ Machine error f9 in bizhub 20


Custom Search


oyawuyioluwaseun015
07-23-2020, 01:57 PM
Hello everyone please I have been facing some difficulty clearing this code f9 in bizhub 20 anyone with an idea please?https://uploads.tapatalk-cdn.com/20200723/5015a9db88dc43ac938cafad52d8b587.jpg

Sent from my Infinix X606 using Tapatalk

Synthohol
07-23-2020, 03:04 PM
Eprom customizing code error.

Implement maintenance mode 74 completely
If that fails replace main board.

Also it needs a bath bad.

oyawuyioluwaseun015
07-23-2020, 03:09 PM
Eprom customizing code error.

Implement maintenance mode 74 completely
If that fails replace main board.

Also it needs a bath bad.Okay thanks so much


Sent from my Infinix X606 using Tapatalk

emujo2
07-23-2020, 03:14 PM
I'm still not sure if I'm looking at 1 machine sitting on top of the other (which may cause some issues) but the bath comment is spot on..If this machine has seen a tech in the last 3 years I'll eat my hat (or fire the tech)

oyawuyioluwaseun015
07-23-2020, 04:12 PM
I'm still not sure if I'm looking at 1 machine sitting on top of the other (which may cause some issues) but the bath comment is spot on..If this machine has seen a tech in the last 3 years I'll eat my hat (or fire the tech)Yes it been long up to 7 years am the second tech to work on it

Sent from my Infinix X606 using Tapatalk

femaster
07-23-2020, 11:26 PM
Also it needs a bath bad.

I've never seen one of those before. Looks old as dirt (pun intended). I'm thinking a dumpster might be a better option than a bath...

oyawuyioluwaseun015
07-24-2020, 10:08 AM
I've never seen one of those before. Looks old as dirt (pun intended). I'm thinking a dumpster might be a better option than a bath...Smile thanks sir for your comment

Sent from my Infinix X606 using Tapatalk

Custom Search