furius
07-28-2020, 05:57 PM
Hi guys, I have a c364e to which I have replaced the MFPB and the SSD.
I followed the textbook procedures as usual, but I have a very strange problem.
If the machine is turned off for a few days once turned on again, it can no longer send the scans to smb/ftp, without returning any errors, and I cannot even access the web panel.
The only way to get the machine working again is through system clear from the service menu.
Tests carried out:
1. mfpb tool reset.
2. firmware update.
3.ssd update.
4. addition of serial scanner in the technical menu.
Some idea?
Thanks so much
I followed the textbook procedures as usual, but I have a very strange problem.
If the machine is turned off for a few days once turned on again, it can no longer send the scans to smb/ftp, without returning any errors, and I cannot even access the web panel.
The only way to get the machine working again is through system clear from the service menu.
Tests carried out:
1. mfpb tool reset.
2. firmware update.
3.ssd update.
4. addition of serial scanner in the technical menu.
Some idea?
Thanks so much