fatduke
08-13-2020, 04:32 PM
Hi everyone,
I got this issue with a C308 (nearly 700k prints).
When machine starts to print something it comes out a grinding noise up right in the exit section and on pics attached I see that gear slide when exit bar works.
I put oil on this gear and also in the upper right part above the fuser, I screw hard the fuser left right screws on the bottom but the noise still occurs.
Any suggestion?
TY
- EDIT OEM PARTS OF PULLEY 18T is A161891301
I hope is only this the problem -
I got this issue with a C308 (nearly 700k prints).
When machine starts to print something it comes out a grinding noise up right in the exit section and on pics attached I see that gear slide when exit bar works.
I put oil on this gear and also in the upper right part above the fuser, I screw hard the fuser left right screws on the bottom but the noise still occurs.
Any suggestion?
TY
- EDIT OEM PARTS OF PULLEY 18T is A161891301
I hope is only this the problem -