Error C186 on bizhub C360

[Midas Prints]

Error C186 on bizhub C360, how do I clear this, somebody help

[tulintron]

Error C186 on bizhub C360, how do I clear this, somebody help A dynamic link error occurs in the program on the MFP board due to an insufficient memory space available, a ROM fault, or other reason when the main power switch is turned ON.

[Phil B.]

A dynamic link error occurs in the program on the MFP board due to an insufficient memory space available, a ROM fault, or other reason when the main power switch is turned ON.

being an end-user.. i think this is above his pay grade.

[tsbservice]

Error C186 on bizhub C360, how do I clear this, somebody help
Did you happen to do Initialization before that error?

[femaster]

Just to add to the problem description previously posted, in case anybody in the future comes searching for this code:

Relevant electrical parts:


MFP board (MFPB)
NVRAM board (NRB)


Procedure:

If the malfunction code “C-C172” has occurred, access
[Service Mode] → [System 2] →[Image Controller Setting]
and check to see if “Controller 1,” “Controller 2,” “Controller
3,” or “Others” is set for [Image Controller Setting].
If any of these is set, according to the kind of controller,
select “Controller 0” or “Controller 1.”
Change MFPB
When not reviving even if the above-mentioned procedure is
done, contact the responsible people of KM.


And I have to say, that last line is really funny, as it actually says that in the service manual. :cool:

[zoool]

did you change some boards? change firmware? if no then please preform nvram initialization from pendrive