View Full Version : Marketplace Software Switch Settings
oliver88
08-29-2020, 12:47 PM
Hello
Does anyone know what the correct marketplace switch settings are for marketplace to work on a C300i?
I have the latest firmware but it says firmware update needed, I think it's software switch related as my installer disables it by default because he hates it.
Thanks
Synthohol
08-29-2020, 01:30 PM
just asking, why do you even want it?
oliver88
08-29-2020, 01:31 PM
Because I want the connector apps it offers
copier tech
08-29-2020, 01:52 PM
Hello
Does anyone know what the correct marketplace switch settings are for marketplace to work on a C300i?
I have the latest firmware but it says firmware update needed, I think it's software switch related as my installer disables it by default because he hates it.
Thanks
SW 172 HEX 01 hides marketplace so I would assume HEX 00 enables it?
oliver88
08-29-2020, 01:56 PM
When I enable Hex 00, it reverts back to Hex 01 hmmm
tsbservice
08-29-2020, 02:08 PM
When I enable Hex 00, it reverts back to Hex 01 hmmm
Do you have SM?
oliver88
08-29-2020, 02:12 PM
Service Mode? Yes I do
Phil B.
08-29-2020, 02:18 PM
Service Mode? Yes I do
i think he talking about SERVICE MANUAL
oliver88
08-29-2020, 02:21 PM
Yes, I have that too
tsbservice
08-29-2020, 02:23 PM
Service Mode? Yes I do
:D
I forgot you're probably enduser. Yes I asked about service manual.
Edit:
Then study it. Your answer is in there. I can tell you needed Hex but it's better for you to learn a bit if you're going to modify sevice mode settings.
oliver88
08-29-2020, 02:25 PM
😆
I forgot you're probably enduser. Yes I asked about service manual.
Yes, I have the service manual haha
The marketplace app works but gets stuck when I enter my login details, and the IWS installer on the PC says the firmware needs upgrading - but it is the latest firmware.
I think my tech disabled a SWW switch, but IDK which one
Phil B.
08-29-2020, 02:25 PM
Yes, I have that too
then READ IT
tsbservice
08-29-2020, 02:30 PM
Yes, I have the service manual haha
The marketplace app works but gets stuck when I enter my login details, and the IWS installer on the PC says the firmware needs upgrading - but it is the latest firmware.
I think my tech disabled a SWW switch, but IDK which one
I edited my last post as you confirmed that have manual. Just search for sw 172.
oliver88
08-29-2020, 02:36 PM
I edited my last post as you confirmed that have manual. Just search for sw 172.
There is nothing in there under SW 172, I have searched the entire document
copier tech
08-29-2020, 02:37 PM
When I enable Hex 00, it reverts back to Hex 01 hmmm
Here ya go
46648
oliver88
08-29-2020, 03:29 PM
Here ya go
46648
That did the trick!!
Cheers
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.