beano
11-06-2008, 01:10 AM
i got a bizhub c550 creasing 8 1/2 x14 and 11x17 out of tray 1,2 bypass works fine and tray 3,4 works it has a new fuser unit ,transfer roller, firmware is base 88
mshaffer
03-06-2009, 06:08 PM
Did you ever get this resolved?
kmcopier
03-06-2009, 06:46 PM
be sure that the paper is going in straight this was the same as for example C450 3/4 th tray
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.