PDA

View Full Version : CQ Bizhub C3110 blank or poor/faint cyan quality


Custom Search


copier tech
09-10-2020, 06:29 PM
Hi all,

Have any of you chaps seen this issue before?

Cyan is either completely blank or has a strange image (see 246 print gradation sample)

The cyan IU is about 50% used however it looks fine, turns ok by hand & has plenty of developer in the unit.

I removed all the IUís, transfer & fuser, cleaned all contacts nothing in the rear looks broken or missing etc.

Iím wondering if itís an HVT or printhead issue?

46744

tsbservice
09-10-2020, 06:41 PM
I would try another cyan IU or to swap IUs(plus chips) to make sure it's not cyan IU but it may code out before you do the test print.
Next is PH unit as you already know.

copier tech
09-10-2020, 07:03 PM
I would try another cyan IU or to swap IUs(plus chips) to make sure it's not cyan IU but it may code out before you do the test print.
Next is PH unit as you already know.

I tried to swap the IU as a test but they physically don't fit!

tsbservice
09-10-2020, 07:10 PM
I tried to swap the IU as a test but they physically don't fit!
This is bad, bad...means you will need another preferably used cyan IU to do the test. Sorry to hear that.

Custom Search