copier tech
09-10-2020, 05:29 PM
Hi all,
Have any of you chaps seen this issue before?
Cyan is either completely blank or has a strange image (see 246 print gradation sample)
The cyan IU is about 50% used however it looks fine, turns ok by hand & has plenty of developer in the unit.
I removed all the IU’s, transfer & fuser, cleaned all contacts nothing in the rear looks broken or missing etc.
I’m wondering if it’s an HVT or printhead issue?
46744
Have any of you chaps seen this issue before?
Cyan is either completely blank or has a strange image (see 246 print gradation sample)
The cyan IU is about 50% used however it looks fine, turns ok by hand & has plenty of developer in the unit.
I removed all the IU’s, transfer & fuser, cleaned all contacts nothing in the rear looks broken or missing etc.
I’m wondering if it’s an HVT or printhead issue?
46744