PDA

View Full Version : Bizhub 3301p

Custom Search


antone
09-11-2020, 04:49 PM
message on control panel...Bin Full ..not sure what's this mean!!


Sent from my SM-N950U using Tapatalk
Phil B.
09-11-2020, 04:51 PM
message on control panel...Bin Full ..not sure what's this mean!!


Sent from my SM-N950U using Tapatalk

man the bin (output) is full or the sensor is broken
blazebusiness
09-11-2020, 05:00 PM
message on control panel...Bin Full ..not sure what's this mean!!


Sent from my SM-N950U using Tapatalk

4.4 Understanding the printer messages
4.4.1 Bin full. Remove paper.
Remove the paper stack from the standard bin.

So, check where the prints exit at the top of the printer. There is a sensor flag on the right hand side as you face the front of the printer. That flag triggers the "NARROW MEDIA/BIN FULL SENSOR"

Flag is stuck
or
Flag is broken
or
Paper in the bin reached a height which correctly triggered the sensor (so remove paper)
tsbservice
09-11-2020, 07:21 PM
Like they both said it's exit tray regarded as output bin. I believe due non KM origin of this model.
antone
09-13-2020, 10:15 PM
Took a part copier..cleaned senors All set ! exit senor

Sent from my SM-N950U using Tapatalk
tsbservice
09-14-2020, 03:00 PM
Hi antone. Did you receive my PM?

Custom Search