View Full Version : Bizhub C552 background
potro_salvaje
09-22-2020, 01:20 PM
Good day everyone. I have a Bizhub C552 that has a background at the beginning of the sheet, drums/devs has already been reviewed, transfer unit has also been reviewed and it does not seem to have anything unusual, any suggestion would be very helpful, i send a reference image.
46843
GIUBOSS
09-22-2020, 03:19 PM
If drum and development units ok, it could be the MFP board.
mayorg
09-22-2020, 04:30 PM
Clean the second transfer
Sent from my SM-G960U using Tapatalk
copier tech
09-22-2020, 05:11 PM
Good day everyone. I have a Bizhub C552 that has a background at the beginning of the sheet, drums/devs has already been reviewed, transfer unit has also been reviewed and it does not seem to have anything unusual, any suggestion would be very helpful, i send a reference image.
46843
What does this mean "drums/devs has already been reviewed, transfer unit has also been reviewed"
So you replaced ALL image units & the transfer unit?
tsbservice
09-22-2020, 06:07 PM
Review, I feel in this case means to look carefully at parts :cool:
Phil B.
09-22-2020, 06:11 PM
Review, I feel in this case means to look carefully at parts :cool:
visually doesn't mean they were checked mechanically.
IHMO visual inspections are good to only a certain point... then the real troubleshooting MUST take over.
blazebusiness
09-22-2020, 06:23 PM
Good day everyone. I have a Bizhub C552 that has a background at the beginning of the sheet, drums/devs has already been reviewed, transfer unit has also been reviewed and it does not seem to have anything unusual, any suggestion would be very helpful, i send a reference image.
46843
Are those image units past life?
Did you check the TCR values in service mode? Should be around 7 or 8.
A visual inspection of a drum/dv unit will normally not reveal much......
tsbservice
09-22-2020, 06:45 PM
visually doesn't mean they were checked mechanically.
IHMO visual inspections are good to only a certain point... then the real troubleshooting MUST take over.
Completely agree Phil.
Phil B.
09-22-2020, 06:48 PM
Are those image units past life?
Did you check the TCR values in service mode? Should be around 7 or 8.
A visual inspection of a drum/dv unit will normally not reveal much......
+1
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.