View Full Version : Konica minolta C3080 fusing Lower roller line
Jayson
09-22-2020, 02:02 PM
Hi guys,
I have a problem with konica minolta C3070 when printed solid color .
The problem is fusing lower roller scratch line cause by fusing separation claws ,even new fusing unit itself also have already .If without claws thin paper will paper jam .
4684446845
Any solution on this ?
Thanks you
uros.service
10-14-2020, 04:15 PM
Hi guys,
I have a problem with konica minolta C3070 when printed solid color .
The problem is fusing lower roller scratch line cause by fusing separation claws ,even new fusing unit itself also have already .If without claws thin paper will paper jam .
4684446845
Any solution on this ?
Thanks you
Hello,
Change the claws. KM have a modification.
Jayson
10-15-2020, 11:33 AM
Hello,
Change the claws. KM have a modification.
so far i never receive any modification claw .Do you have part ?
konicavod
10-16-2020, 07:15 PM
A50UR72U11
Jayson
10-17-2020, 03:40 AM
A50UR72U11
Now currently we using this one cause the problems 😔
Lordnixon
02-28-2021, 06:08 PM
Now currently we using this one cause the problems 😔
48465
You can try it (A4EU747501)
blackcat4866
02-28-2021, 06:35 PM
48465
You can try it (A4EU747501)
So to be clear, you remove the original lower claws and replace them with this separation sheet?
And, this solution jams more often on lightweight media and images with heavy fill to the voids?
=^..^=
Lordnixon
02-28-2021, 06:47 PM
So to be clear, you remove the original lower claws and replace them with this separation sheet?
And, this solution jams more often on lightweight media and images with heavy fill to the voids?
=^..^=
yes(
customer was not satisfied with this option. It was not possible to check in practice.
But it's like a fuser sheet in C6000/7000:)
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.