PDA

View Full Version : Konica Bizhub 808 disable SMB 1.0


Custom Search


pstoric83
09-28-2020, 09:27 PM
I believe we have the newer firmware that can do this but I'm not sure where the setting is. I logged in as admin and went to Network > SMB Settings and I thought it was under "Client Settings" but I'm not sure what to change to get it to scan to our server 2019 using SMB 2.0/3.0? Am I looking in the correct spot? Currently it's set to NTLM V1


https://www.screencast.com/t/TgeuMIaQ

tsbservice
09-28-2020, 09:53 PM
I believe we have the newer firmware that can do this but I'm not sure where the setting is. I logged in as admin and went to Network > SMB Settings and I thought it was under "Client Settings" but I'm not sure what to change to get it to scan to our server 2019 using SMB 2.0/3.0? Am I looking in the correct spot? Currently it's set to NTLM V1


https://www.screencast.com/t/TgeuMIaQ

NTLM1 is no go. At What exactly FW version is your machine?

pstoric83
09-29-2020, 12:51 AM
NTLM1 is no go. At What exactly FW version is your machine?

Here is what I see on the ROM version page. I can switch it to NTLM v2 on the page in the screenshot above but not sure if that's the correct setting or not.

ROM Version

MFP Card Version
A7950Y0-F000-GP2-W5


MFP Controller BOOT Program
A7950Y0-1E00-G00-05


MFP Controller Linux Base
Linux-3.10.68


MFP Controller Kernel Program
A7950Y0-1C00-GC1-83


MFP Controller SubSet
A7950Y0-1F00-G00-W4


MFP Controller
A7950Y0-0100-GP2-W5


MFP Controller System
A7950Y0-1000-GP2-W5


MFP Controller Print Controller
A7950Y0-3000-GP0-W1


MFP Controller Print Controller Font
A7950Y0-3F00-G00-U2


MFP Controller Print Controller Demo Page
A7950Y0-3E00-G00-00


Image Reader Controller
A7950Y0-8600-G00-B2


MFP Controller MIO
A7950Y0-5000-G01-C1


Operation Panel Message Data
A7950Y0-8100-GC1-W5


MFP Controller PIC
A7950Y0-8200-G00-F0


MFP Controller PIC Image Parameter



MFP Controller Thread Image Parameter



MFP Controller IR Image Parameter



Finisher
A87G0Y0-0071-G00-14


Machine Controller
A7960Y0-0200-G00-41


Machine Controller BOOT
A7950Y0-0210-G00-01


Machine Controller Printer
A7960Y0-0220-G00-38


Machine Controller Media
A7960Y0-0230-G00-03


Machine Controller IO
A7960Y0-0240-G00-00


Machine Controller Scanner
A7950Y0-0300-G00-09


ADF
A7820Y0-0024-G00-06


Fax Board Controller1



Fax Board Controller2



Fax Board Controller3



Fax Board Controller4



SD



DSC1



DSC2



PK



PI



Panel CPU
A7PU0Y0-8900-G30-03


SCB
A79J0Y0-1A00-G00-03


Power Sub-CPU
A7950Y0-1900-G00-81


SATA Controller
A7AH0Y0-6403-G00-04


Integrated Printer Driver Version
5-4.2-0-GP2-W5


Movie Data
A7950Y0-C000-G00-90


Voice Data



Dictionary Data
A7AH0Y0-B100-G00-01


OCR Library



Authentication Customize Data



Panel Sound Data
A7PU0Y0-C200-G00-00






Loadable Device Driver1



Loadable Device Driver2

srvctec
10-01-2020, 05:18 PM
Here is what I see on the ROM version page. I can switch it to NTLM v2 on the page in the screenshot above but not sure if that's the correct setting or not.


Yes, that is the correct place to change the setting.

tsbservice
10-01-2020, 06:56 PM
Yes, that is the correct place to change the setting.

Thanks man I forgot to reply him. My bad seems the weight of age is beating my experience :o

pstoric83
10-01-2020, 06:57 PM
Yes, that is the correct place to change the setting.

So under client setting change it to NTLM V2?

srvctec
10-05-2020, 03:36 PM
So under client setting change it to NTLM V2?

Well, if you want to force it to V2 only, then yes.

blazebusiness
10-05-2020, 04:15 PM
I believe we have the newer firmware that can do this but I'm not sure where the setting is. I logged in as admin and went to Network > SMB Settings and I thought it was under "Client Settings" but I'm not sure what to change to get it to scan to our server 2019 using SMB 2.0/3.0? Am I looking in the correct spot? Currently it's set to NTLM V1


https://www.screencast.com/t/TgeuMIaQ

On the Konica's there is also a software switch setting for SMB:

For SMB you can verify what's enabled in Dip sw 219

Hex 00 enables SMB 1 & 2
Hex 04 enables SMB 2 only

Custom Search