PDA

View Full Version : Miscellaneous Konica Minolta C454e - Does not wake up - Firmware


Custom Search


mearmi
10-14-2020, 11:21 PM
Hi All

Yesterday, installed Konica Minolta C454e. in the morning printer stopped responding.
Display was off. Sub Power light was on and start button was Red. Restarted the printer and while printing got a message. Job deleted due to insufficient memory.

Firmware is old A5C10Y0-F000-GD3-K9(00), is that could be a reason? Please also advise which one is new firmware for C454e

A5C10Y0-F000-G20-M1 or A61F0Y0-F000-G20-M1 or?

Many thanks

mearmi

Synthohol
10-14-2020, 11:37 PM
A5C10Y0-F000-G20-M1 is correct.
do you need it?
also permit (the ability to change) sleep mode in svc mode and turn off sleep in admin.
sleep mode is a killer on the 4e's
also bit sw 25 set to 60

mearmi
10-15-2020, 01:12 AM
A5C10Y0-F000-G20-M1 is correct.
do you need it?
also permit (the ability to change) sleep mode in svc mode and turn off sleep in admin.
sleep mode is a killer on the 4e's
also bit sw 25 set to 60

Many thanks for your prompt response. Yes I got it

Will do as you advised.

Thanks again for your continuous support and cooperation.

mearmi
10-15-2020, 01:17 AM
A5C10Y0-F000-G20-M1 is correct.
do you need it?
also permit (the ability to change) sleep mode in svc mode and turn off sleep in admin.
sleep mode is a killer on the 4e's
also bit sw 25 set to 60

Please advise where to permit (the ability to change) sleep mode in svc mode

Thanks

Synthohol
10-15-2020, 01:37 AM
system1 sleep on/off setting ->permit
then...

To display the option of “OFF” for the sleep mode setting screen available from [Administrator Settings] -> [System Settings] -> [Power
Supply/Power Save Settings]. turn off completely and set power save to the max if you want.

enjoy!

mearmi
10-15-2020, 01:52 AM
system1 sleep on/off setting ->permit
then...

To display the option of “OFF” for the sleep mode setting screen available from [Administrator Settings] -> [System Settings] -> [Power
Supply/Power Save Settings]. turn off completely and set power save to the max if you want.

enjoy!

Many Thanks

mearmi
10-16-2020, 04:57 AM
Many Thanks

Many thanks. Today didn't get that problem. Machine is running smoothly. But couldn't update the firmware as machine does not detect the external memory (used the same external memory for other machine yesterday and it was working). Noticed one more thing in administrator Settings - user Box settings it just show number 6 7 8 only and in external memory function setting it shows only SAVE Document option.

Thanks a lot

Synthohol
10-16-2020, 12:57 PM
admin mode, user box setting, external memory setting change all to yes.

copyman
10-16-2020, 01:26 PM
I always turn off the sleep mode on all 4 series machines. To many issues when waking up (not me the copier :p).

Seem to recall a special F/W for this issue but easier to just turn off in admin mode after doing what Synthohol posted.

CompyTech
10-16-2020, 02:07 PM
Disable power consumption in sleepmode and turn off weekly timer. Also sounds like your HDD is disabled, check in the service mode to see if it is set to Installed.

Xehe
10-19-2020, 04:11 AM
Hi,

How many different firmware is there to install on a factory reset c454e? I have that old FW aswell as the thread starter have. But it seems like a need the one for the guide to. Or is it the same?

Custom Search