turkeyfoot
11-10-2008, 01:34 PM
Im headed back into the copier repair biz after a 6 month foray into home inspections and wondered if someone could give me an honest opinion about my resume.
During my 8 yrs working for Oce' I worked on all things Oce': 45-65 ppm copiers; wide format; 150 ppm printers; 1180 ppm commercial printers. All had a xerographic process and controllers. Color copiers were my specialty.
I was also factory trained/worked on the Canon clc700-800; clc 1150 and clc 1000 for the past few yrs.
Prior to Oce' I worked on the Toshiba dp 2060/2860; 4550/6550 (60).
I expect to be regarded as less than someone with current product experience but would it be irrelevant without training?
Thanks in advance!
During my 8 yrs working for Oce' I worked on all things Oce': 45-65 ppm copiers; wide format; 150 ppm printers; 1180 ppm commercial printers. All had a xerographic process and controllers. Color copiers were my specialty.
I was also factory trained/worked on the Canon clc700-800; clc 1150 and clc 1000 for the past few yrs.
Prior to Oce' I worked on the Toshiba dp 2060/2860; 4550/6550 (60).
I expect to be regarded as less than someone with current product experience but would it be irrelevant without training?
Thanks in advance!