View Full Version : Enable password for user setting in bh283/363/423
stf8888
10-22-2020, 11:33 AM
Dear Technicians of KM ,
Is there any method for me to enable password in User Setting ?
In some of the copier user setting are free , without need admin password.
We need to set a password to prevent of customer mess up the system.
Thanks.
Terna247
10-22-2020, 11:43 AM
You could create user box and each user have his protection.
Sent from my Infinix X606C using Tapatalk
EarthKmTech
10-23-2020, 12:04 AM
Dear Technicians of KM ,
Is there any method for me to enable password in User Setting ?
In some of the copier user setting are free , without need admin password.
We need to set a password to prevent of customer mess up the system.
Thanks.
E series onwards can have the administrator password applied to utility menu - don't think it applies to those dinosaurs.
For E series onwards the setting is: DipSw No.200:[Hex:20]
rrrohan
10-23-2020, 02:17 AM
Pity U can't lock paper tray paper type.
I find that's the most fiddled with setting and customers end up locking out a tray because they set it to thick by mistake
Sent from my Pixel 4 XL using Tapatalk
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.