PDA

View Full Version : J-3203 Bizhub PRO 950


Custom Search


escalante
11-15-2020, 10:53 AM
In the manual it tells me that it is a PS57 sensor. Which is marked with a red circle. Replace it with the PS57 sensor. I was not successful, I still had the same fault, then I replaced the PS8 sensor, not having much success I still had the fault. Any ideas, any suggestions are welcome.47311

Enviado desde mi Infinix X656 mediante Tapatalk

Leyahné
11-15-2020, 10:57 AM
Please check the ICP on the ADU board.

Sent from my SM-N960F using Tapatalk

blackcat4866
11-15-2020, 04:08 PM
What's up with that belt tensioner? Did you wrap in in tape to attempt to tighten the belt?

The few times that I've seen 3203 jams it was caused by a damaged fuser claw.
=^..^=

escalante
11-18-2020, 11:05 PM
Goodnight. Thank you for your comment and suggestion.
Tell him to fix the paper jam code fault by replacing the M5 motor part code: 56AA 8011 2

Shown in the following picture47357

Enviado desde mi Infinix X656 mediante Tapatalk

Custom Search