PDA

View Full Version : IC-409 System SW installation


Custom Search


B0265
11-13-2008, 03:47 PM
Have anyone had problems installing system sw on a IC-409? I have only done it once using a USB Flash drive and it worked, but now another guy is trying to install it using a cross-over cable and it ends up in "installation failed" after a while.
Any known issues?

WaveyDavey
11-14-2008, 09:06 AM
Make sure you plug the cross over into the engine port not the LAN

kmcopier
11-14-2008, 08:29 PM
disable ftp service on pc/laptop the software is send by tftp and if ftp runs you get a conflict

big jase
11-20-2008, 09:02 PM
i had a problem with cross over when i was using vista, but when i used a lap top with xp all went ok:D

Custom Search