View Full Version : Electrical Bizhubpress 1250 no power problem
alangraph
12-03-2020, 08:54 PM
i have a bizhubpress 1250, when the main power is turned on, the screen show the massage "wait a moment"", for two second and then goes black. the power led remain solid green, and the power save led is also solid green. No blinking or anything else. cannot access the print controller or machine by network, nor can i enter service mode when power on.
Can find anything in the service manuals for this behaivor.
Plase help.
Thanks
Phil B.
12-03-2020, 08:58 PM
i have a bizhubpress 1250, when the main power is turned on, the screen show the massage "wait a moment"", for two second and then goes black. the power led remain solid green, and the power save led is also solid green. No blinking or anything else. cannot access the print controller or machine by network, nor can i enter service mode when power on.
Can find anything in the service manuals for this behaivor.
Plase help.
Thanks
format HDD reload firmware.
have you put a meter to the wires coming out of the LVPS? HVPS?
what exactly have you done?
alangraph
12-03-2020, 10:58 PM
format HDD reload firmware.
have you put a meter to the wires coming out of the LVPS? HVPS?
what exactly have you done?
I check the DCPS/2, it was a cooling fan that was blocked.
Thanks.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.