Problem with a C6500 Poping C4520, C2211, Belt

[hardcore]

Transfer belt rides off a bit and codes out, changed belt before getting ready to replace again! any other ideas!:(

[random]

There was a tech note about this, mainly to do with the spring tension arm that you remove when you put a new belt on. The two metal dowels must be hard up against the adjacent plate. Also use a ruler or something to make sure the sides of the belt unit are straight.

[laserman06]

Also, there is a tech bulletin showing how to adjust the roller for walking. If you did not have a problem before replacing the first time, then I agree with Random.

If it was the original belt then might want to look at the bulletin.

[hardcore]

Thanks guys could you tell me the Bulletin Number? can't seem to find it.