PDA

View Full Version : Error Code Bizhub C221 error code 3925


Custom Search


r4roty
12-13-2020, 04:45 PM
Hi all
How do I reset c3925 error after removing the fuser unit of this machine to enable me remove the transfer belt but in the process a wire pulled out from the center temperature sensor plug jack harness located on the right side of the side door? I entered service mode input CE password, but could not find fuser reset. This copier control and display is different from other BIZHUB
Please any ideas will be much appreciated

Synthohol
12-13-2020, 04:59 PM
it would be trouble reset not fuser reset.
i dont think that model was sold in the US, i didnt see it in MKM anywhere.

tsbservice
12-13-2020, 05:46 PM
I think you will need Service manual if what Synt suggested don't work.

copier tech
12-13-2020, 05:56 PM
Hi all
How do I reset c3925 error after removing the fuser unit of this machine to enable me remove the transfer belt but in the process a wire pulled out from the center temperature sensor plug jack harness located on the right side of the side door? I entered service mode input CE password, but could not find fuser reset. This copier control and display is different from other BIZHUB
Please any ideas will be much appreciated

If you have reconnected the wire run trouble reset.

Trouble reset Konica C221 - YouTube (https://www.youtube.com/watch?v=oJbdx-lMWKQ)

r4roty
12-21-2020, 10:01 PM
thanks problem solved

Custom Search