4 series, Engine DipSW to reset toner to full

[rrrohan]

4 series, Engine DipSW to reset toner to full, is this possible. I cant recall if this is only on 8 series and newer. If it is possible could someone please remind me of the

[tsbservice]

Not possible on 4/4e series as far as I know. What problem you have?

[Bix]

Not possible on 4/4e series as far as I know. What problem you have?


It often happens to me that the toner is almost finished when it is actually full or vice versa. I wait for the printer to stop due to low toner, remove and reinsert the toner tube to return to 100.

[rrrohan]

Customer used non genuine toner and it was changed early. Was gonna see if I could just force it to report full but I'll just tell him to ignore it.

Sent from my Pixel 4 XL using Tapatalk

[gere1]

for series 4 dipsw1 resets all toner

[tsbservice]

for series 4 dipsw1 resets all toner

You mean all 4 toners?

[gere1]

yes the 4 tonerIt usually does well but I have had some equipment that does not reset it

[allan]

for series 4 dipsw1 resets all toner

Question is what else does that reset?

[gere1]

just the tonerWhat else do you want to restore?I use google translator to see if I do not understand the question well

[wjurls]

I wonder if that switch will work on my truck too? Change a dip switch and boom! Full tank!!

[tsbservice]

I wonder if that switch will work on my truck too? Change a dip switch and boom! Full tank!!

It should...plus antifreeze, engine oil and brake fluid to make them 4 :cool:

[Copier repairman]

I have DIPSW enabled on the 4 series.
I ran DIPSW1, but the toner was not full.

[copier tech]

I have DIPSW enabled on the 4 series.
I ran DIPSW1, but the toner was not full.

This option is not available on the 4 series.

Simply remove all the toners, run a print run, when the copier calls for a toner refit the used ones this will reset the toner life count.

[Synthohol]

...Simply remove all the toners, run a print run, when the copier calls for a toner refit the used ones this will reset the toner life count.

thats been my "cheat" for years!!

[copier tech]

thats been my "cheat" for years!!

Yup, happens when the clients replace the toner before the copier calls for it.

[rrrohan]

Yeah I removed toner and did some 255 prints. All good now.

Sent from my Pixel 4 XL using Tapatalk