View Full Version : konica c360 problem
enricocopyline
01-20-2021, 10:06 AM
the printer scans and photocopies but does not print from the PC or the demo page and if you insert the key it tells me external memory detected. this feature cannot currently be used. when a print is launched on the pc it says printed the machine flashes the blue light but does not print. I have already formatted the hard disk I cleared all data I checked that the printout with code is not inserted. what can cause this problem? has it happened to someone? thanks for the help
wynter17
01-20-2021, 10:23 AM
Maybe a bad network cable
Sent from my SM-G980F using Tapatalk
KM7155
01-20-2021, 10:28 AM
the printer scans and photocopies but does not print from the PC or the demo page and if you insert the key it tells me external memory detected. this feature cannot currently be used. when a print is launched on the pc it says printed the machine flashes the blue light but does not print. I have already formatted the hard disk I cleared all data I checked that the printout with code is not inserted. what can cause this problem? has it happened to someone? thanks for the help
all the PC same outcome? make sure the secure print is not ticked.
enricocopyline
01-20-2021, 10:37 AM
all the PC same outcome? make sure the secure print is not ticked.
secure printing is not checked but as well as from the pc it does not even print the demo page or even from a usb key
rrrohan
01-20-2021, 11:00 AM
Check job log
Sent from my Pixel 4 XL using Tapatalk
copier tech
01-20-2021, 03:27 PM
secure printing is not checked but as well as from the pc it does not even print the demo page or even from a usb key
I had this exact issue a few weeks ago.
The fact that it wont print the demo page you can rule out any network or driver issues.
For me I updated the firmware & the issue was resolved, I think it may have become corrupted somehow.
Also check you don't have account track etc enabled.
allan
01-20-2021, 07:29 PM
Make sure consumables are set to no-stop in service mode.
Anything out of life?
Also try to do system error clear. Initialization could also help.
tsbservice
01-20-2021, 07:37 PM
Allan he did initialize. And if life stop is hitting there he can't copy also I think.
I would try first to update FW as copier tech suggested.
blackcat4866
01-20-2021, 11:21 PM
A lot of these machines came defaulted to disable Direct Print from USB. Make sure it's ON.
Can you view the webpage?
Will it ping?
Are there any errors stored?
Will it print internal lists like the Management List or Counter Page?
=^..^=
allan
01-20-2021, 11:42 PM
Allan he did initialize. And if life stop is hitting there he can't copy also I think.
I would try first to update FW as copier tech suggested.
My bad. Will teach me to read. :rolleyes:
enricocopyline
01-21-2021, 04:38 PM
I had this exact issue a few weeks ago.
The fact that it wont print the demo page you can rule out any network or driver issues.
For me I updated the firmware & the issue was resolved, I think it may have become corrupted somehow.
Also check you don't have account track etc enabled.
fixed with firmware update thank you very kind
copier tech
01-21-2021, 05:53 PM
fixed with firmware update thank you very kind
Well done, thanks for the update.
Firmware Update - Printer & Copier Firmware (http://www.copierfirmware.co.uk)
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.